- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello community,
I'm just wondering here how to do the RADIO RX TEST described in document https://www.cypress.com/file/298091/download without the usage of tools like "mbt".
I'm only able to send RAW HCI hex commands and receive their answers. This already works for the RADIO TX TEST described in the same document.
For RADIO RX TEST there is described, that there should be another event (or something similar) reported which starts with in BT-CoreSpec undefined HCI packet indicator 0x07. The Doc describes it as:
0000 < 07 01 00 00 00 00 00 00 00 1D 03 00 00 1D 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >
With my chip I only get this:
Sending HCI Command:
0000 < 01 52 FC 0E 45 23 01 3A 70 20 E8 03 00 03 01 03 11 00
Received HCI Event:
0000 < 04 0E 04 01 52 FC 00 >
And I do not receive anything more.
Does the tool mbt somehow activate the 0x07 message in background?
Thank you in advance!
Best Regards
Rainer
Solved! Go to Solution.
- Labels:
-
HCI UART
-
Manufacturing and Test
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Rainer,
The CYW89342 is not supported within the broad market or here on the Cypress IoT community.
For development tool and technical support, please work with the local Cypress/Distribution team that directed you towards this platform.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Rainer,
The CYW89342 is not supported within the broad market or here on the Cypress IoT community.
For development tool and technical support, please work with the local Cypress/Distribution team that directed you towards this platform.