1 Reply Latest reply on Apr 12, 2019 3:08 AM by SheetalJ_96

    How to do radio rx test on CYW89342

    RaKi_4172166

      Hello community,

       

      I'm just wondering here how to do the RADIO RX TEST described in document https://www.cypress.com/file/298091/download  without the usage of tools like "mbt".

      I'm only able to send RAW HCI hex commands and receive their answers. This already works for the RADIO TX TEST described in the same document.

      For RADIO RX TEST there is described, that there should be another event (or something similar) reported which starts with in BT-CoreSpec undefined HCI packet indicator 0x07. The Doc describes it as:

      0000 < 07 01 00 00 00 00 00 00 00 1D 03 00 00 1D 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >

      With my chip I only get this:

      Sending HCI Command:

      0000 < 01 52 FC 0E 45 23 01 3A 70 20 E8 03 00 03 01 03 11 00

      Received HCI Event:

      0000 < 04 0E 04 01 52 FC 00 >

      And I do not receive anything more.

      Does the tool mbt somehow activate the 0x07 message in background?

       

      Thank you in advance!

       

      Best Regards

       

      Rainer