S70FS01GS Flash Algorithm

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
hibic_1376941
Level 1
Level 1

I was wondering if Cypress already has the Flash Algorithm created for the S70FS01GS 1Gb QSPI NOR Flash. I am upgrading from an S25FS512S and it seems that the read/write accesses have changed quite a bit between the two chips. I was hoping that Cypress would already have an algorithm developed which I can use to flash data onto the chip. If anyone could point me in the right direction it would be appreciated.

Thanks

0 Likes
1 Solution
lock attach
Attachments are accessible only for community members.
Apurva_S
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi Himesh,

Thank you so much for your patience.

Attached is the SLLD source code for S70FS01GS in folder fss_S70FS01GS.zip. It is based on v16.2.1. For using this code, you must implement HAL layer function. The HAL layer example is in slld_v16.2.1.zip.

- Apurva

View solution in original post

0 Likes
2 Replies
Apurva_S
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi Himesh,

The current algorithm that we have does not provide support for 1Gb devices.

We are discussing this issue internally and shall get back to you on this shortly.

Regards,

Apurva

0 Likes
lock attach
Attachments are accessible only for community members.
Apurva_S
Moderator
Moderator
Moderator
100 likes received 500 replies posted 250 solutions authored

Hi Himesh,

Thank you so much for your patience.

Attached is the SLLD source code for S70FS01GS in folder fss_S70FS01GS.zip. It is based on v16.2.1. For using this code, you must implement HAL layer function. The HAL layer example is in slld_v16.2.1.zip.

- Apurva

0 Likes