5 Replies Latest reply on Jun 27, 2019 2:47 AM by ShifangZ_26

    CCG3 as both PD (Sink/Source) and BC1.2 in a single Firmware

    KrMu_1422446

      Hi All,

       

      Iam evaluating a CCG3 EVK board as one of the Product realization factor.

      After getting the evaluation board and compiling the Power Bank Firmware found that size of the flash is limited to 65K and SRAM to 8K.

      Since the product needs all the feature supported by one single Firmware i guess with available Flash and SRAM resource we can not use in one single Firmware.

      Can somebody tried using CCG3 with all the features and able to fit in one single firmware would be very helpful for concluding something.

       

      Is there any EVK board that support both the PD and BC1.2?

       

      Regards,

      Krishna