- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am working on USB hub application and referring to 'CYPD3125 Notebook solution with Dual Role functionality' example. I am looking at more detailed description for the events of app_evt_t than what is mentioned in section 6.24.4.2 in "EZ-PDTMCCGx Firmware StackAPI Reference GuideVersion 3.3.0"
Also wanted to know the order of this events.
Thanks in advance.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Cypress PD event is follow Type-C and Power Delivery SPEC, the sequence is follow those SPEC. You shall refer those SPEC and assure your case with difference sequence. For example, Connection state diagram. Cypress define those event is following those SPECs.
Best Regards,
Lisa
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Cypress PD event is follow Type-C and Power Delivery SPEC, the sequence is follow those SPEC. You shall refer those SPEC and assure your case with difference sequence. For example, Connection state diagram. Cypress define those event is following those SPECs.
Best Regards,
Lisa