4 Replies Latest reply on Mar 12, 2019 2:37 AM by FaBi_2763241

    CYALKIT-E02 as Eddystone


      Hello all,

      I have tested the solar CYALKIT-E02 module as sensor after charging the super capacitor for few minutes through usb and it shows regular BLE activity.

      However when changing firmware to the Eddystone from the 100 day examples (50), even after charging for half hour, either scanning with the Locate app or the CySmart dongle, nothing is detected. If I plug the solar module into the debug board for charging, then it will be detected broadcasting URL and TLM packets. I measured about 2.88v at the super capacitor.