2 Replies Latest reply on Feb 26, 2019 3:15 PM by user_1096206

    Maximum trace width for a CapSense trackpad and buttons

    user_1096206

      Hi, I am designing a small trackpad with some buttons to be used on wearable technology using CapSense. I followed the design guidelines described in AN64846 "Getting Started with CapSense" (https://www.cypress.com/file/41076/download ) that specifies a trace width no greater than 7 mil (0.18 mm).

       

      I was wondering if a 0.2 mm width (in traces and hatch ground) is still acceptable to be handled with CYBLE-022001, because most of PCB manufacturers in my region cant handle a lower width.