2 of 2 people found this helpful
You can use wl noise and wl rssi to retrieve the noise and RSSI. I will check for channel utilization. For reference, the WL command set is available here WL Tool for Embedded 802.11 Systems: CYW43xx Technical Information
Thank You GauravS_31 for the input.
Can you help me further on how to use wl commands on the WICED CYW943907AEVAL1F platform?
I have tried fetching for rssi and noise thorugh the following, :
When I looked through the API, it gets these values from ioctl.
1 of 1 people found this helpful
You can use test.console app to use WL commands. Go to console.mk and enable CONSOLE_ENABLE_WL ?= 1. You can also use wl status after associating with an AP using join command, and this should provide you noise, RSSI and SNR together.