1 of 1 people found this helpful
The building errors are just because CY86247BZI-D54(PSoC 62) device has no BLE functionality, while Cy86347BZI-BLD53(PSoC 63) does have. The original code is targeted for Cy86347BZI-BLD53, therefore, you can not get the code work just through changing the device part number.
You need CY8CKIT-062-BLE DVK -
to verify this code, instead of PSOC6 WIFI-BT Pioneer DVK.
so i got the wrong psoc6. great..
thanks for the response.
I went ahead and purchased the board you suggested. I can run some of the programs from the link below and they work. But the one of interest (using capsense with PWM of robot) I do not find in repository.
when I run 2-5 basic Cap Sense: I can reproduce the pwm modulation of LED
There is no Project '2-5b"
There is a MC-2-5b-Capsense, but it does not give desired functionality (Green LED with capsense PWM output.) It only blinks red.
I have also tried maincontroller, but it does the same thing.
Before I start digging into the code, I would like to touch base on this as this is the second board.