1 Reply Latest reply on Feb 14, 2019 1:51 AM by YiZ_31

    FX3 type-c Receptacle design

    UnHa_3846631

      Hi all,

       

      I have a question about the FX3 type-c Receptacle design below.

      First, I want to get 5V / 3A via a USB C-type cable (Host: PC)

       

      I know that the current that can be supplied according to the CC line is decided in the USB C-type application.

      If I connect CC1 / CC2 with 5.1k pull-down as shown in figure 2 without separate CC controller, I want to check if there is no problem in receiving 3A.

       

       

       

      With best regards

        

      Ham