1 Reply Latest reply on Feb 14, 2019 2:52 AM by GyanC_36
      • 1. Re: Read / write in the eeprom of CYBLE-012011
        GyanC_36

        EEPROM is not supported by this device. You can use any other device based on PSoC 4 BLE.

         

        Right Click on the project -> Device selector -> Select 'PSoC 4 BLE ' in 'Series' tab -> select any device based on the features required for your application.

         

                                 1.PNG

         

         

        -Gyan

        1 of 1 people found this helpful