- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi all,
Could you tell me where to find the drivers and application of CE95393.
My kit is CYCKIT-059(CY8C5888LTI-LP097).
Thanks
Boone
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Boone,
The drivers for the example along with the host application can be found as part of the FX3 SDK. After the installation of the FX3 SDK, the drivers can be found in the below path:
C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\driver
The host application can be found in the below path:
C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\application
The application to send and receive data to the USB endpoints can be found in the below path.
C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\application\c_sharp\controlcenter\bin\Release
Best regards,
Srinath S
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Boone,
The drivers for the example along with the host application can be found as part of the FX3 SDK. After the installation of the FX3 SDK, the drivers can be found in the below path:
C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\driver
The host application can be found in the below path:
C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\application
The application to send and receive data to the USB endpoints can be found in the below path.
C:\Program Files (x86)\Cypress\EZ-USB FX3 SDK\1.3\application\c_sharp\controlcenter\bin\Release
Best regards,
Srinath S