I need the pinout to connect a standard JTAG/SWD adapter (in my case Segger JLink) to the CYW943907AEVAL1F.
I can see a picture of the Olimex JTAG with jumpers in the "CYW943907AEVAL1F Evaluation Kit User Guide" and also in OpenOCD -WICED. BUT those jumpers go to more than the JTAG header (it also goes to J9) and there is no documentation of the pins.
Please let me know all pins that need to be connected to make JTAG work.
(this was originally asked as CYW943907AEVAL1F JTAG Header but that post turned into a discussion of JLink drivers)
The 2 extra Wires are the RESET & VTref Connections.
Jlink Pin CYW943907AEVAL1F Pin
Pin1 : VTref J9 - Pin4 : +3V3
Pin15: Reset J9 - Pin3 : RESET_N
These connections are documented here.Downloading through Jlink Segger in WICED SDK 6.2 and future releases.