1 Reply Latest reply on Jan 30, 2019 9:41 PM by GeonaP_26

    MFT cycle time between consecutive instruction

    masu_1341616

      About Setting of MFT register(wfta/wftb:OCCP/TCCP)

       

      We want to use MFT for PWM as below usages.

      - Usages of MFT

      It start from dead time of both channel.

      First, I set MFT register(wfta/wftb:OCCP/TCCP) for deadtime.

      next, It work for PWM of both channel.

      I set MFT register(wfta/wftb:OCCP/TCCP) for expected pulse.

       

      How much need cycle time for between each instruction (min or max)?

      Do you have your recommendation or specification?