2 Replies Latest reply on Jan 31, 2019 12:20 PM by waluc_4008766

    [HX3] is it possible to request an hard reset by software command?



      I have a device connected to HX3. The FW of my device can be updated by USB. After the FW update the device can be detected again only unplugging and re-plugging it.


      Using the CY4609 I noticed that pressing the reset button on the hub after the FW update of the device, my software can detect it again as if it has been unplugged and re-plugged.


      Is there a way to reset the HX3 with a software command instead of pressing the reset button?


      Thank you in advance