5 Replies Latest reply on Jan 18, 2019 9:34 AM by user_1536336

    CYBLE-416045-02 Debug-Error

    user_1536336

      Hello,

       

      I'm using the CYBLE-416045-02 module with PSoC Creator 4.2.

       

      When I try to use Port_9_0 or Port_9_1 as digital output, I can not debug anymore. The log message says:

       

      Programming device 'PSoC 63 CYBLE-416045-02 (CM4)' with file 'C:\Users\ps\Desktop\Transceiver\CYBLE-416045-02\Transceiver.cydsn\CortexM4\ARM_GCC_541\Debug\Transceiver.hex'.

      Device ID Check

      Erasing of Main Flash...

      Programming of Flash Starting...

      Protecting...

      Verify Checksum...

      Finished Programming

      Device 'PSoC 63 CYBLE-416045-02 (CM4)' was successfully programmed at 01/16/2019 09:00:00.

      Error: dbg.M0006: The start request failed.  Encountered error (Error 'SWD error OK|WAIT|FAULT|PERR' received while attempting to read memory 0x402102C0-0x402102C4)

       

      If I disable the specific ports or use any other port, the problem disappear and I can debug as usual.

       

       

      Thanks