My miniprog3 does not connect to the Cypress programmer 2.0, it does connect to Psoc Creator and programs a 5LP fine. So, this tells me that the miniprog3 is operational. Any clues?

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
guag_1662311
Level 1
Level 1
5 questions asked First reply posted First question asked

My miniprog3 does not connect to the Cypress programmer 2.0, it does connect to Psoc Creator and programs a 5LP fine. So, this tells me that the miniprog3 is operational. Any clues?

0 Likes
1 Solution
Vison_Zhang
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 250 sign-ins

Compatible issue.

Programmer SoftwareDevicesCypress Debug ProbeIDE SupportHost OSCommunication Firmware
Cypress ProgrammerPSoC 6® MCU
IoT Platforms such as
CYW94390x
CYW207xx
MiniProg4ModusToolbox™ IDEWindows
Linux
macOS
KitProg3
PSoC ProgrammerMost PSoC 6 devices*
PSoC 5LP
PSoC 4
PSoC 3
PSoC 1
FM0+ devices
USB Type C
MiniProg3
MiniProg4
PSoC Creator
PSoC Designer (for PSoC 1 devices)
WindowsKitProg3
KitProg2
KitProg1

View solution in original post

1 Reply
Vison_Zhang
Moderator
Moderator
Moderator
First comment on KBA 750 replies posted 250 sign-ins

Compatible issue.

Programmer SoftwareDevicesCypress Debug ProbeIDE SupportHost OSCommunication Firmware
Cypress ProgrammerPSoC 6® MCU
IoT Platforms such as
CYW94390x
CYW207xx
MiniProg4ModusToolbox™ IDEWindows
Linux
macOS
KitProg3
PSoC ProgrammerMost PSoC 6 devices*
PSoC 5LP
PSoC 4
PSoC 3
PSoC 1
FM0+ devices
USB Type C
MiniProg3
MiniProg4
PSoC Creator
PSoC Designer (for PSoC 1 devices)
WindowsKitProg3
KitProg2
KitProg1