4 Replies Latest reply on Jan 22, 2019 11:59 PM by abhinavg_21

    CX3 with RAW12 MIPI input 16 bit data output

    AnWa_3863696

      Hi,

      I try to use EZ USB Suite with GUI, with RAW12 MIPI input and 16 bit video-output then try to get data from Host PC.

      The data I get with OpenCV VideoCapture tool seems incorrect.

      Check the GUID format within cyc3_uvcdscr.c file

      0X55,0X59,0X56,0X59,

      0X00,0X00,0X10,0X00,

      0X80,0X00,0X00,0XAA,

      0X00,0X38,0X9B,0X71,

       

      It seems to a UYVY format data will be received on PC side. Is it possible to change the setting that I can get RAW12 data in PC side, without any (or less) computing.

      We have to get exact same data (or only byte shift is allow) to make sure our depth sensor algorithm can be implemented without out any problem during data exchange in different bus.

       

      Thanks

      Angus