7 Replies Latest reply on Jan 15, 2019 9:40 PM by SrinathS_16

    FX3 EEPROM Bootloader question




      My FX3 is configured for i2c boot via PMODE pins, and there are 2 EEPROMs connected on the i2c bus. Each EEPROM is assigned an address in hardware. My firmware is only stored on one of those EEPROMs, the other contains some application data.


      Will the bootloader know which EEPROM to boot from? Current guesses:

        - Is there a setting that tells the bootloader which address to boot from?

        - Does the bootloader try all the EEPROMs till it finds one with correct boot header?