- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi,
-I use the 68013a chip。To bulid a project ,I use the USBJmpTB.obj(size of 3kB) from the example project---bulkloop in my uvision project,and it operates normally。
However,I exchange the USBJmpTB.obj with the USBJmpTB.a51 in the example project(from AN78446_Interrupt_Handling_in_EZ-USB prj),and I buiasdfld the project.The
project normally generates the (prj name).hex file and the USBJmpTB.obj file(but its size is 2kB)。This new project can operates Its Endpoint normally,but it can‘’t operate some of 68013a‘s IO,such as IOA---PA.0 ...
I wonder what's wrong with that. I don't understand!!! :the Jmp Table should only have effect on the interruput,but it is normal. And It indeed has infuence on the IO??
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
-Please explain the difference in operation between the endpoints and the I/O pins after the exchange. Is the output different from what you are setting in the firmware?
-Please also let us know if you have made any changes to the USBJmpTB.a51 file from the Application Note.
Best Regards,
Sananya
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
-Please explain the difference in operation between the endpoints and the I/O pins after the exchange. Is the output different from what you are setting in the firmware?
-Please also let us know if you have made any changes to the USBJmpTB.a51 file from the Application Note.
Best Regards,
Sananya
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thanks for your help。I have figured out that I commented on the following statement in the file USBjmpTB.a51:
; CSEG AT 53H
;USB_Int4AutoVector equ $ + 2
; ljmp USB_Jump_Table ; Autovector will replace byte 55
it's hard to image at first time that these statement could have effect on the IO control