12 Replies Latest reply on Jan 3, 2019 1:36 AM by PriyaM_16 Branched from an earlier discussion.

    Re: PSoC WiFi-BT KIT Default Hardware Settings

      LED4 is the power LED so I'm not sure why it is off.  My SW5 is also in the middle.  Again I'm using Windows 7, but here is how my device manager & KitProg2 setting are.  Gordon

       

        • 1. Re: PSoC WiFi-BT KIT Default Hardware Settings
          garc_3476631

          201x1223 - CYC8KIT now appears on ThisPC.jpg201x1223 - CYC8KIT KitProg Device Manager.jpg201x1223 - CYC8KIT KitProg Device Manager Portable Device KitProg2 Properties.jpg

           

           

          201x1223 - CYC8KIT KitProg, WICED environment to build, run DEMO - FAIL.jpg

          1 of 1 people found this helpful
          • 2. Re: PSoC WiFi-BT KIT Default Hardware Settings
            garc_3476631

            Hello,

             

            Some progress.

             

            Using W10 Devide Manager,

            added and configred 2 drivers, similar to user_xxxxxx

             

            Port

            Portable Devices

             

            now KIT appears on W10 laptop as:

             

            KitProg2 (G:)

             

            I am readind and following document:

             

            CE222494_PSoC_6_WICED_WiFi_Demo.pdf

             

            Status:

             

            KIT named KitProg2 is seen by W10 laptop

            LED 1,2,3 OFF

            LED 4 ON

            TFT DISPLAY = WHITE

            WICED (Eclipse Platform 4.4.2)

            Steps 8,9 of CE222494_PSoC_6_WICED_WiFi_Demo.pdf, incomplete or FAIL.

            Build process has errors (15) and warnings.

             

             

            Could the documentation be WRONG ?

            1 of 1 people found this helpful
            • 4. Re: PSoC WiFi-BT KIT Default Hardware Settings
              garc_3476631

              User_4012xxxxx,

               

              How were the Device Manager settings configured when you first started?

               

              For me, manual driver search and install

              • 5. Re: PSoC WiFi-BT KIT Default Hardware Settings
                PriyaM_16

                The drivers are installed correctly. There seems to be problem in programming through WICED.

                The Quick start guide is located in WICED SDK at 43xxx_Wi-Fi/doc/WICED-QSG.pdf

                Kindly re-install WICED in your PC and building any default application like snip.scan

                For buiding snip.scan for CY8CKIT_062 platform, make the target as follows:

                snip.scan-CY8CKIT_062

                If the compilation goes through, you can download the application by adding download_apps download run in the make string:

                snip.scan-CY8CKIT_062 download_apps download run

                1 of 1 people found this helpful
                • 7. Re: PSoC WiFi-BT KIT Default Hardware Settings
                  garc_3476631

                  03:15:36 **** Build of configuration Default for project 43xxx_Wi-Fi ****

                  "C:\\WICED\\SDK\\WICED-Studio-6.2\\43xxx_Wi-Fi\\make.exe" snip.scan-CY8CKIT_062 download_apps download run

                  MAKEFILE MAKECMDGOALS=snip.scan-CY8CKIT_062 download_apps download run OTA2_SUPPORT is disabled

                  Building Bootloader

                  Building Serial Flash Loader App

                  MAKEFILE MAKECMDGOALS=waf.sflash_write-NoOS-CY8CKIT_062-SDIO OTA2_SUPPORT is disabled

                  waf.sflash_write-NoOS-CY8CKIT_062-SDIO

                  ----------------------------------|---------|

                                                    |  Static |

                                Module              |   RAM   |

                  ----------------------------------+---------|

                  App                               |   21130 |

                  Interrupt Vectors                 |     652 |

                  libc                              |     556 |

                  Other                             |   16953 |

                  platform                          |    2412 |

                  Ring_Buffer                       |     160 |

                  SPI_Flash_Library_CY8CKIT_062     |    7188 |

                  Startup Stack & Link Script fill  |    1021 |

                  WWD                               |     132 |

                  ----------------------------------+---------|

                  TOTAL (bytes)                     |   50204 |

                  ----------------------------------|---------|

                   

                   

                  Build complete

                  Finished Building Bootloader

                  Finished Building Serial Flash Loader App

                   

                   

                   

                   

                  snip.scan-CY8CKIT_062

                  ----------------------------------|---------|---------|

                                                    |         |  Static |

                                Module              |  Flash  |   RAM   |

                  ----------------------------------+---------+---------|

                  App                               |     474 |       0 |

                  crc                               |    1060 |       0 |

                  Interrupt Vectors                 |     652 |       0 |

                  libc                              |   23418 |    3372 |

                  Networking                        |     694 |    9155 |

                  NetX-Duo - Interfaces & Stacks    |       0 |      16 |

                  NVRam                             |     640 |       0 |

                  Other                             |   33679 |    6933 |

                  Packet Buffers                    |       0 |   22470 |

                  platform                          |    2300 |     736 |

                  RAM Initialisation                |    4180 |       0 |

                  resources                         |      44 |       0 |

                  Ring_Buffer                       |     160 |       0 |

                  SPI_Flash_Library_CY8CKIT_062     |    1088 |     352 |

                  Startup Stack & Link Script fill  |      51 |      13 |

                  ThreadX                           |    7888 |     400 |

                  TLV                               |      30 |       0 |

                  WICED                             |    3920 |    1064 |

                  Wiced_RO_FS                       |     566 |       0 |

                  WWD                               |   16645 |    3165 |

                  ----------------------------------+---------+---------|

                  TOTAL (bytes)                     |   93309 |   47676 |

                  ----------------------------------|---------|---------|

                   

                   

                  Building apps lookup table

                  Downloading Bootloader ...

                  "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

                  Downloading DCT ...

                  "**** OpenOCD failed - ensure you have installed the driver from the drivers directory, and that the debugger is not running **** In Linux this may be due to USB access permissions. In a virtual machine it may be due to USB passthrough settings. Check in the task list that another OpenOCD process is not running. Check that you have the correct target and JTAG device plugged in. ****"

                  Downloading resources filesystem ... build/snip.scan-CY8CKIT_062/filesystem.bin at sector 1  size 96...

                  tools/makefiles/wiced_apps.mk:334: recipe for target 'FILESYSTEM_IMAGE_DOWNLOAD' failed

                  make.exe[1]: *** [FILESYSTEM_IMAGE_DOWNLOAD] Error 1

                  Makefile:351: recipe for target 'main_app' failed

                  make: *** [main_app] Error 2

                   

                   

                  03:15:45 Build Finished (took 9s.39ms)

                  • 11. Re: PSoC WiFi-BT KIT Default Hardware Settings
                    garc_3476631

                    Anyone have a similar experience and know the next steps to implement ..........

                     

                    I still theorize a damaged KIT

                    • 12. Re: PSoC WiFi-BT KIT Default Hardware Settings
                      PriyaM_16

                      Hello,

                      I see the project files .cproject and .project in your snip directory in WICED. These files should appear directly under 43xxx_Wi-Fi workspace because entire 43xxx_Wi-Fi is an project which contains necessary libraries and files for working wiht WICED. Individual snips are not treated as projects in WICED hence seeing the project files in snip directory is strange.

                      Can you please unistall WICED, delete the related WICED files from your PC and install again? Delete the files from your local directory. For me it is at C:\Users\riya\AppData\Local\WICED-Studio-6.2

                      1 of 1 people found this helpful