3 Replies Latest reply on Dec 9, 2018 10:03 PM by AnjanaM_61

    CYW20706 for Bluetooth audio headphone application

      Hello -

       

      I'm considering using the CYW20706 for a Bluetooth audio headphone application.  It will be connected to an external DSP and power amp via I2S and be controlled by external MCU via UART.  The CYW20706 datasheet shows that the necessary ports are available to do this, but I noticed that audio headphone was not listed as one of the applications in the datasheet.  This has me concerned that there may be some limitations for audio applications.  Could someone tell me more about using CYW20706 in an audio application. 

       

      The other key requirement for me is to be able to support iAP2 for communication with Apple devices over Bluetooth.  It seems like this is should be supported by the SDK, but I would like to confirm.

       

      Thanks!

       

      John