1 Reply Latest reply on Dec 6, 2018 5:43 PM by SrinathS_16 Branched to a new discussion.

    serial number

    rasec_2385561

      I was reading a discussion about setting the serial number "FX3 Serial number ". What I read was trying to use a SerialNumberGenerate.exe  . So I tried to run the executable with my hex file output (probably wrong). The output I received is below.

       

      C:\Cypress\SerialNumberGenerate>SerialNumberGenerate 7 Project1.hex

      Exception. Please check the file path... Press Any Key to Exit...

       

      C:\Cypress\SerialNumberGenerate>SerialNumberGenerate 7 .\Project1.hex

      Exception. Please check the file path... Press Any Key to Exit...

       

      Any ideas what I am doing wrong ?

        • 1. Re: serial number
          SrinathS_16

          Hello,

           

          - SerialNumberGenerate in FX3 Serial number was a test application for reference. It was customized for the user who asked for a serial number starting with 'CA'. But, it can be modified if you wanted to have a different character string.

          - The application was meant for generating IMG files and not HEX files.

          - The application expects 3 arguments which is different from your implementation. This is the reason for the exception. Please read through the Readme.txt file attached with the application.

           

          Best regards,

          Srinath S