- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I’m having a problem trying to compile the CE222221, PSoC 6 MCU Voice Recorder, example program that is referenced in the CY8CKIT-062-WiFi-BT, PSoC 6 WiFi-BT Pioneer Kit Guide. Following the instructions in both the guide and the CE222221 app note, the compile fails due to missing header files. I’m using the latest example download, CY8CKIT-062-WiFi-BT_PSoC®6_WiFi-BT_Pioneer_Kit_Code_Examples.zip, from Cypress’ website. The app note mentions a FreeRTOSConfig.h header file and states “DO NOT replace the FreeRTOSConfig.h file”. The example zip includes the header file, but when I try to compile I get the following message:
“The following configuration files have been removed from the project because they are no longer used by the design. These files are still on disk but changes made to them will need to be replicated in the new files. Removed files: C:\Users\gordonmx\Documents\PSoC Creator\4.2\Examples\PSoC 6 MCU\CE222221_Voice_Recorder.cydsn\FreeRTOSConfig.h
Details –
Some configuration files are no longer used by the design. These files have been removed from the project with new files added in their place. Any changes made to the files in question will need to be replicated in the newly added files.”
Note: Because my PC is running Windows 7 Pro and the default directory for the examples is in the “C:\Program files” path with restricted permissions, I set up my workspace into C:\Users\gordonmx\Documents\PSoC Creator\4.2\Examples\PSoC 6 MCU\CE222221_Voice_Recorder.cydsn
When I press [OK] the build continues, but fails with the following message:
In file included from main_cm4.c:43:0:
The command 'arm-none-eabi-gcc.exe' failed with exit code '1'.
- rtos.h:46:26: fatal error: FreeRTOS.h: No such file or directory
compilation terminated.
--------------- Build Failed: 12/05/2018 14:55:21 ---------------
The header file rtos.h does exist, but FreeRTOS.h does not, as well a number of other header files referenced in rtos.h, such as task.h, queue.h, semphr.h and event_groups.h.
Cypress Product Version (from PCreator About Page)-
Environment:
PSoC Creator 4.2 (4.2.0.641)
Culture: English (United States)
OS Version: Microsoft Windows NT 6.1.7601 Service Pack 1
CLR Version: 4.0.30319.42000
Installed CyInstaller Products:
CY8CKIT-042-BLE Kit 1.0 Rev.*G
CY8CKIT-042-BLE-A Kit 1.0 Rev.*B
CY8CKIT-044 PSoC 4 M-Series Pioneer Kit 1.0 Rev.*B
CY8CKIT-048 PSoC Analog Coprocessor Pioneer Kit 1.0 Rev.**
CY8CKIT-062-WiFi-BT PSoC 6 WiFi-BT Pioneer Kit 1.0 Rev.**
Cypress Document Manager 1.0 SP1
CySmart 1.3
Peripheral Driver Library 3.0.4
PSoC Programmer 3.27.3
PSoC Creator 4.2
I’ve attached the build.log for more details. What am I doing wrong? Thank you for your assistance.
Gordon Margulieux
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Since this is an RTOS project it has to enabled in the build settings, before starting the build.
Navigate to "Project >> Build Settings" and configure as shown below
Start the build. Now when it prompts to replace the files, click "cancel".
Regards,
Yeshwanth
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello,
Since this is an RTOS project it has to enabled in the build settings, before starting the build.
Navigate to "Project >> Build Settings" and configure as shown below
Start the build. Now when it prompts to replace the files, click "cancel".
Regards,
Yeshwanth