2 Replies Latest reply on Dec 19, 2018 1:26 PM by user_58680

    FM4-176L-S6E2CC-ETH no MOSI signal

      Hello, I am continuing my work with S6E2CC and now I tried to use CSIO from PDL 2.1.0. I wanted to communicate with my other board via SPI with S6E2CC as master at no avail-it failed to read or send. I measured with scope that clock is alive but I cannot see MOSI signal. I used csio polling example but there was no result. I upload my project below. I guess I fail to initialise something but I have no clue-maybe someone has experienced something like this?