4 Replies Latest reply on Dec 31, 2018 3:27 AM by SayaniS_66

    I am using a cyble212020.  The device has a single button that is used to put the micro in deepsleep and wakeup.  The button generates an interrupt to wakeup the micro.  The code has a timer counter and an isr routine to handle timer functions and led con

    LaFo_1751236

      I am using a cyble212020.  The device has a single button that is used to put the micro in deepsleep and wakeup.  The button generates an interrupt to wakeup the micro.  The code has a timer counter and an isr routine to handle timer functions and led controls.  About 1 in 10 times after wakeup from deepsleep the code will hang in isr_1.  Using timer_1_clearinterrupt to clear in the isr and in the wakeup code.  Tried many things to get it running but no luck so far.  Thanks