2 Replies Latest reply on Nov 30, 2018 6:07 AM by RaKu_3095736

    interrupt not working in pin no P4[5] or P4[4]

    RaKu_3095736

      hi all, I am counting square wave on pin no P4[5] or P4[4] based on rising edge or falling edge interrupt,

      but it's not working on P4[5] or P4[4], the same code is working on any other pins

      I am using PSOC4.2 and CY8C5268AXI-LP047TQFP-100-M