12 Replies Latest reply on Dec 3, 2018 11:36 AM by DoLo_351801

    cy8ckit-042 connection to Bridge Control Panel SW using miniprog3 .


      I 'm using Cypress CY8CKIT-042 and miniprog3 with your example SW "CapSense_CSD_P4_Proximity_Design01". The program works but I want to use the Bridge Control Panel for capsense tuning. I hooked up the miniprog 3 to the computer usb and it programs the chip.... I used the command they said to use in the bridge control panel but I don't get anything. I have used the bridge control panel with PSOC1 designs, so I am familiar with it. I don't know if I am using the correct Tx pin.


      I;m sure this is easy but I am missing some information.