3 Replies Latest reply on Nov 28, 2018 5:04 AM by PriyaM_16

    CYW943907AEVAL1F external JTAG signals driving against FTDI JTAG signals


      On the CYW943907AEVAL1F evaluation board, I want to use an external JTAG device plugged into the J3 connector. I have looked at the example given in "OpenOCD-WICED", but I still have a question about the hardware connection. Aren't you driving against the JTAG signals coming from the FTDI chip if you close the SW4 switches and plug in a JTAG device?