1 Reply Latest reply on Nov 20, 2018 3:33 AM by SrinathS_16

    CYUSB3KIT-003 EZ-USB J7 pins


      I'm following this example: http://www.cypress.com/documentation/application-notes/an84868-configuring-fpga-over-usb-using-cypress-ez-usb-fx3

      Using a CYUSB3KIT-003 instead of the 001.

      In section 4 Operating Instructions it says to connect some pins (of FX3 SuperSpeed Explorer Kit) to:

      • Pin 23 of J7
      • Pin 31 of J7
      • Pin 27 of J7
      • Pin 19 of J7
      • Pin 37 of J7

      However I don't seem to find the pins on my board. I read: http://www.cypress.com/file/139246/download and on the pinnout description is maps the GPIO's (GPIF II Interface) with other pin names according to use but I don't seem to find a bunch of pins under the name J7 that contains the pins listed.

      Couldn't find it either on http://www.cypress.com/file/140296/download


      I am looking for a block called J7 that has numerous pins but I cannot find it. This seams as a basic question so I'm sorry about it.