- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
When I use PSoC Creator 4.2 to program PSoC63 on the CY8CKIT-062-BLE pioneer board, the error occurred as follow:
Error: dbg.M0023: There was an error while programming the device: PSoC Programmer reported error (100 - EraseAll API returned: Error code 0x009FF1EC: Unknown SROM status code)
How to solve this problem and recovery to program?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Could you let me know what the 'AC' refers to?
What's the VDD voltage you selected on SW5 during programming?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Wang Yang,
Which programmer are you using, on board KitProg or MiniProg3?
Thanks,
Ryan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Ryan,
I use on board KitProg2. I keep the board AC OFF for a while and it works OK to program.
Still, I don't know the reason, if you have any idea please share with me.
Thanks,
Wang Yang
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Could you let me know what the 'AC' refers to?
What's the VDD voltage you selected on SW5 during programming?