9 Replies Latest reply on Nov 26, 2018 2:11 AM by RaktimR_11

    [Type1LD] How to build and run test.console without external flash ?

    CaTs_3766536

      Hi Cypress, and ToIn_1742091 from Murata,

      Compal project (CTI3) build-in Murata Type1LD module withour external flash, however wifi malfunction after download "test.console-MurataType1LD download run" through WICED-Studio-6.2 with commentout two line in MurataType1LD.mk (*3) in N1- 4629_Type1LD-Quick_Start_Guide_1.3.pdf (page 10) on both [Murata Type1LD Evaluation board with external flash], and [CTI3 Type1LD w/o external flash]

       

      (*3) commentout two line in MurataType1LD.mk

      #ifneq ($(NO_WIFI_FIRMWARE),)

      #endif

      CTI3_without_ExternalFlash.png

      Could you please tell me how to build and run test.console without external flash to make wifi work on both [CTI3 Type1LD] without external flash?

       

       

      After (*3) commentout two line in MurataType1LD.mk with
      Starting WICED vWiced_006.002.001.0002
      Platform MurataType1LD initialised
      Started ThreadX v5.8
      Initialising NetX_Duo v5.10_sp3
      Creating Packet pools
      fail: func=wwd_bus_write_backplane_value line=613
      fail: func=wwd_bus_sdio_download_firmware line=801
      Console app
      > status
      WICED Version  : Wiced_006.002.001.0002
      Platform       : MurataType1LD

       

      Many thanks.

      Caspar