2 Replies Latest reply on Nov 14, 2018 1:12 AM by miba_2417781

    WaveDac8, no wc1/wc2 signal

      I do not have a pulse  at the WaveDAC8 outputs wc1 or wc2 after the value table is done. I reduced the problem to the Project ‘2_WaveDAC8_TwoWaves’ from the example workspace AN69133. In this example, I measure a static sine as configured in waveform 1 at the output. I also routed signal wc1 to a pin to observe with an oscilloscope, there is no pulse.

      My system :

      CY8CKIT-059 (CY8C5888LTI-LP097)

      PSoC Creator  4.2 (4.2.0.641)

      OS Version: Windows 10 (Microsoft Windows NT 10.0.16299.0)