6 Replies Latest reply on Apr 21, 2015 12:34 PM by MichaelF_56

    Production Programming - EEPROM



      I am going into production with my application, and we are using the 20732A chipset not module, so we have an external EEPROM - 24FC512.


      When trying to flash the EEPROM before assembly onto the board, which is the correct hex file to use? I have tried both the -release files and also the bin file. These files that are created in the /build/application folder. None of these seem to correctly flash our application on the EEPROM. Am I doing something wrong?


      Your help is much appreciated.