1 Reply Latest reply on Oct 28, 2018 6:27 PM by YangyangC_06

    dual cyusb3065 with sony sensors

      We have an application that requires 2 UVC cameras, so we layout 2 child-board with cyusb3065 & sony sensor (USB3 HUB on main-board),  but we get some problem in test :

       

      1. one cam can work, but 2 cam will stop working after 2~5 seconds.

       

      2. if I add one USB3 hub between device & PC, then 2 cam can work properly.

       

      Is there any idea for this problem? or could I solve this with some error-catch code?