3 Replies Latest reply on Oct 24, 2018 12:56 AM by RajathB_01

    how to use the ADC, if it is not present in PSoC Creator for CCG3PA?


      Hi All.

      There is the following problem:

      CCG3PA has a built-in ADC and the datasheet informs "This ADC can be accessed from all GPIOs and the DP/DM pins through an on-chip analog mux".

      But in the PSoC creator there is no ADC component to use to read the analog input.

      Please help me, how can I read the analog input in the application code without the ADC component.