- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm trying to compile libopus (https://www.opus-codec.org/) with the tool chain that is included in the SDK, but I've ran into several road blocks.
Initially I was getting an error due to a missing system call:
"... newlib-1.20.0/newlib/libc/stdlib/exit.c:65: undefined reference ... "
After reading through the newlib documentation I discovered that I have to provide stub methods for the system calls that aren't implemented. After providing the stubs I encountered the error that is currently holding me back:
"configure:7364: checking for stdlib.h
configure:7364: /Users/jcorrea/WICED-Smart-SDK-2.2.0/Tools/ARM_GNU/bin/OSX/arm-none-eabi-gcc -c -g -O2 conftest.c >&5
conftest.c:9:19: fatal error: stdio.h: No such file or directory"
Is there anything special that I need to do to compile this library with the WICED tool chain? Any help is appreciated.
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Johnny,
I checked with the developers, and we don't support the building of this library with our tool chain.
We will support this later on another platform and I will ping you when that happens.
Thanks
JT
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Johnny,
I checked with the developers, and we don't support the building of this library with our tool chain.
We will support this later on another platform and I will ping you when that happens.
Thanks
JT