2 Replies Latest reply on Oct 17, 2018 1:13 PM by plaskowski_3798111

    S25FS512S Changing from QSPI to Serial

      If the part is placed in QSPI mode, is it still capable of receiving legacy serial commands even though it's set to QSPI?


      Reason: I would like to have 2 masters access the flash. One master communicates vias QSPI and the second master via serial. The signals would be muxed. The QSPI master is default but in case of failures, the serial master would mux the signals, disconnect the qspi master, and reprogram the golden image.