The "SNIC Serial Interface Specification" v2.6 describes a message that the host must send to the SN8200 in response to the WIFI_NETWORK_STATUS_IND message with the SCID WIFI_NETWORK_STATUS_CFM. The value for this SCID is not documented in the file nor can I find it used in any of the example code.
What is the correct value for this?
all CFM message are equal to the corresponding IND message | 0x80.
so if WIFI_NETWORK_STATUS_IND = 0x10, then WIFI_NETWORK_STATUS_CFM = 0x90