1 Reply Latest reply on Oct 11, 2018 5:56 PM by ShifangZ_26

    CY4532 EZ-PD EVK voltage drop even after changing the config value

      Hi Lisa,

       

      As you recommended, I changed the SYS_DEEPSLEEP_ENABLE as 0

      #define SYS_DEEPSLEEP_ENABLE                        (0u)

      but the cypress board still VBUS keep crashing to 0.

      I'll attach the image.

      Magenta is vbus, green is cc2 and light green is cc1 which dose pd communication.

      Please take a look at this issue.

       

      Thanks