1 Reply Latest reply on Sep 27, 2018 10:42 PM by anks

    I am using a CY8C5488AXI-LP120. When setting up the USBFS component, for the Vusb detection the datasheet says: For a PSoC 3/PSoC 5LP device, the VBUS monitoring pin can be directly connected to VBUS, if it is assigned to an SIO port. This configuration u

    ga.elentech_1662311

      I am using a CY8C5488AXI-LP120. When setting up the USBFS component, for the Vusb detection the datasheet says: For a PSoC 3/PSoC 5LP device, the VBUS monitoring pin can be directly connected to VBUS, if it is assigned to an SIO port. This configuration utilizes the hot swap capabilities of these pins. Question: with the psoc powered by 3.3V, can it be directly connected to the Vusb (5V) provided that an SIO pin is used?