Sep 19, 2018
03:03 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 19, 2018
03:03 AM
Is it possible to take steps to be able to run the FX3 GPIF II Slave FIFO at 125 MHz?
Background: We have a very noise sensitive system and would like to base all clocks on a common 125 MHz clock (or divisions). This means our only feasable clock frequencies are 62.5 MHz and 125 MHz.
Solved! Go to Solution.
1 Solution
Sep 19, 2018
03:35 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 19, 2018
03:35 AM
Hello,
The maximum frequency of GPIF II is 100MHz. Kindly, use 62.5 MHz clock so that it can fall within the range.
Best regards,
Srinath S
1 Reply
Sep 19, 2018
03:35 AM
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Sep 19, 2018
03:35 AM
Hello,
The maximum frequency of GPIF II is 100MHz. Kindly, use 62.5 MHz clock so that it can fall within the range.
Best regards,
Srinath S