1 2 Previous Next 16 Replies Latest reply on Sep 20, 2018 1:52 PM by rola_264706

    UART transmission problem in example project SCB_UartComm loaded on CY8C4248LQI-BL583. Both RX ad TX transmit

      Hi everyone,


      My problem is the following:


      I d/l then example project SCB_UartComm  on CY8C4248LQI-BL583.

      Both RX ad TX transmit, I wan the pin 1.4 to be configured as RX ...

      I already checked on several different boards but this does not help there is also not short circuit between RX and TX.



      Thank you for your feedback,



        1 2 Previous Next