1 Reply Latest reply on Sep 17, 2018 2:19 AM by ranjithk_81

    Sending adc data over BLE module, PSoC 4


      Hello to everybody!


      I have working for a project in PSoC 4 Ble that I have been doing.

      This PSoC 4 BLE has been new to me and especially the configuration to use the BLE module with which it counts.

      My project is read a sensor, processing the signal by means of an ADC and send those readings with the BLE module either to a program for serial reading (such as Teraterm or HyperTerminal for example) or to be able to take those readings customized with the mobile application of CySmart

      I have an example from  "100_Projects_in_100_Days" for the PSoC Ble to uart as Peripheral but despite of verifying the configuration and the code, I still have the error of "gccCyBLEStack_BLE_SOC_PERIPHERAL.a: Invalid argument

      The command 'arm-none-eabi-gcc.exe' failed with exit code '1'.

      The truth is that this environment has been new for me, it has been very interesting

      Could someone guide me? here I attached the project.

      Thank you and have a good day.