1 Reply Latest reply on Sep 16, 2018 5:31 PM by RuzheZ_36

    PCB and peripheral circuit design for CY8C5888FNI-LP214/210




      I am using CY8C5888FNI-LP214 for my project.


      I use four layer board to fan out the pins, and the peripheral circuit I use as the datasheet shows(Example schematic for 100-pin TQFP part with Power Connection).


      And then, I use MINIPROG3 to download/erase the program. But  PSoC creator/programmer cannot acquire SWD(10 pins) device.

      The problem has worried me for a long time.  If someone ever uses it, please give me some advice about PCB and the peripheral circuit.