Rather than just a screenshot, please post your whole project if possible. We can only see 4 and a half of the 19 errors.
In PSoC Creator:
Project > Archive Workspace/Project > Minimal
Make sure "Compress Archive (zip)" is checked. This will create a nice little zip file you can attach to a post.
As far as your specific issue:
Check out the setting "External OE Buffer" in the "Advanced" tab of the I2C component. This will split the I2C lines into 4 signals ,2 input and 2 output, rather than 2 bidirectional signals. Signals that go into a mux inside PSoC must be the same direction. You are also getting errors due to not having a select signal on either of those muxes. You can control them via firmware with a control register component.