1 Reply Latest reply on Sep 6, 2018 3:28 PM by BoTa_264741

    PID controller


      Dear sir,My name is shrikant. I want to PID in current close loop.Our project name is baggage scanner.so higher(Kelovolt 100 kv to 180 kv) kv is generate,but problem is that current(mA) is not constant .For Eg. I have set 140 kv and 0.9mA,In that case mA is not constant (0.8 to 1 mA ).So we want to pid for current .I don't have idea about how to start my work .I think pid  loop is two ways either software or  hardware .please guide us