3 Replies Latest reply on Sep 3, 2018 9:40 PM by BragadeeshV_41

    PSOC4 Starting general use of shield pin create issue



      I am using PSOC4 CY8C4245-AXI 483 chip for capsense product. Earliery, I have put 10nF 5% capacitor at shield  pin P4.3.

      But then i have removed the capacitor and started using this pin as GPIO. But After that I am observing some misbehavior at capsense touch.


      Is there any specific roll of this shield pin and capacitor in capsense?