Power Management Bus

Tip / Sign in to post questions, reply, level up, and achieve exciting badges. Know more

cross mob
joli_601446
Level 5
Level 5
10 likes given 10 sign-ins 5 sign-ins

Hello, I'm using a DC/DC converter that has a Power Management Bus interface that can be used to program the DC/DC converter. Are there any modules that I could use to implement a PMBUS interface?

Thanks,

Joe

0 Likes
1 Solution
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked

Hello Joe,

There is a PMBus Slave implementation.

link : http://www.cypress.com/documentation/component-datasheets/smbus-and-pmbus-slave

Best Regards,
VRS

View solution in original post

0 Likes
2 Replies
joli_601446
Level 5
Level 5
10 likes given 10 sign-ins 5 sign-ins

Hello, just letting the community know that the PMBUS is really I2C. That is my understanding so this should be easily done in the PSOC MCU.

Joe

0 Likes
Vasanth
Moderator
Moderator
Moderator
250 sign-ins 500 solutions authored First question asked

Hello Joe,

There is a PMBus Slave implementation.

link : http://www.cypress.com/documentation/component-datasheets/smbus-and-pmbus-slave

Best Regards,
VRS

0 Likes