1 of 1 people found this helpful
Please open CMD in the directory where you have kept the python script and Run the following command
<SCRIPT_DIR>python wl_test.py -l C:/Users/<Username>/Documents/WICED-Studio-6.2.1/43xxx_Wi-Fi/libraries/test/wl_tool/ -p <COM_PORT NUMBER (e.g 11)>
Please make a note of the slashes used and enter it in the exact format as shown in the example execution.
If you want to execute for example wl ver and wl up, then replace the commands (line 12) with commands = ['ver' , 'up'] OR if you want to execute wl ver and wl country, then replace the line #12 with commands = ['ver' , 'country']
Please note that the script provided is just a starting point for your application and right now it is limited to wl commands only.